Toshiba e-studio 452 Printing Manual page 336

7 Printing from UNIX
— Banner Paper Source
The banner paper source can be specified using the following option.
Option Value
bauto-source
bdrawer1
bdrawer2
bdrawer3
bdrawer4
blcf
If the banner paper source is not specified the PCL5e auto paper source command "<esc>&l7H"
will be sent. The banner page source cannot be set to manual feed. The paper size always has
priority over the paper source.
Example: The command to specify that the banner page paper source is the LCF is
"lp -o blcf filename".
— Banner Media Type
The banner page paper source can also be selected using the media type using the following
option.
Option Value
bmtype=Plain1
bmtype=
Transparency
bmtype=Thick1
bmtype=Thick2
bmtype=Thick3
The paper size always has priority over the media type and the paper source.
If this option is not specified the command will not be sent so the printer's default value will be
used to print the banner page.
The command to specify that the banner page should print on a colored media type is
"lp -o bmtype=Plain1 filename".
336 Printing from an Application
Alternate
Value
Select the auto paper tray selection.
bupper Select the 1st drawer.
bcas1
blower Select the 2nd drawer.
bcas2
bpedupper Select the 3rd drawer.
bcas3
bpedlower Select the 4th drawer.
bcas4
BLCF Select the LCF. LCF is not available for some countries
or regions.
Alternate
Value
The paper source that contains Plain1 paper is
requested.
The paper source that contains transparency slides is
requested.
The paper source that contains Thick1 paper is
requested.
The paper source that contains Thich2 paper is
requested.
The paper source that contains Thich3 paper is
requested.
Description
Description