Toshiba e-studio 452 Printing Manual page 300

6 Printing from Macintosh
- Long Edge Punch without rotation — Select this to create holes on the left side for the
portrait document, or on the top for the landscape document.
- Short Edge Punch without rotation — Select this to create holes on the top for the por-
trait document, or on the right for the landscape document.
- Long Edge Punch with 180 degree rotation — Select this to create holes on the right
side for the portrait document, or on the bottom for the landscape document.
- Short Edge Punch with 180 degree rotation — Select this to create holes on the bot-
tom for the portrait document, or on the left for the landscape document.
This option cannot be selected if a hole punch unit is not installed.
3) Stapling
This sets whether a print job is stapled.
- Off — Select this to print without stapling.
- Upper Left (Portrait)/Upper Right (Landscape) — Select this to staple in the upper left
for the portrait document, or in the upper right for the landscape document.
300 Printing from Application on Mac OS X 10.2.4 to Mac OS X 10.4.x