Toshiba e-studio 452 Printing Manual page 172

3 Installing Client Software for Macintosh
Drawers
For e-STUDIO452 Series:
Not Installed — Select this when no optional drawer is installed.
Drawer 3 — Select this when the drawer 3 is installed.
Drawer 3 and 4 — Select this when the drawer 3 and 4 are installed.
LCF — Select this when the LCF is installed.
For e-STUDIO282 Series:
Drawer 1 — Select this when the Drawer 1 is installed.
Drawer 1 & LCF — Select this when the Drawer 1 and LCF are installed.
Drawer 1 & 3 — Select this when the Drawer 1 and Drawer 3 are installed.
Drawer 1,3 & 4 — Select this when the Drawer 1, Drawer 3 and Drawer 4 are installed.
Drawer 1 & 2 — Select this when the Drawer 1 and Drawer 2 are installed.
Drawer 1,2 & LCF — Select this when the Drawer 1, Drawer 2 and LCF are installed.
Drawer 1,2 & 3 — Select this when the Drawer 1, Drawer 2 and Drawer 3 are installed.
Drawer 1,2,3 & 4 — Select this when the Drawer 1, Drawer2, Drawer 3 and Drawer 4 are
installed.
LCF is not available for some countries or regions.
Automatic Duplexing Unit (e-STUDIO282 Series Only)
Not Installed — Select this when the Automatic Duplexing Unit is not installed.
Installed — Select this when the Automatic Duplexing Unit is installed.
12
Click [OK].
Configuring Macintosh AppleTalk printing
Before installing the printer driver for AppleTalk printing on Macintosh, check with your system
administrator to make sure of the following:
- This equipment is connected to the network and turned on.
- The AppleTalk settings is correct.
1
Click Apple menu and select [Chooser].
The Chooser dialog box appears.
172 Installing the Printer on Mac OS 8.6/9.x