Toshiba e-studio 452 Printing Manual page 154

3 Installing Client Software for Macintosh
Drawers
For e-STUDIO452 Series:
Not Installed — Select this when no optional drawer is installed.
Drawer 3 — Select this when the drawer 3 is installed.
Drawer 3 and 4 — Select this when the drawer 3 and 4 are installed.
LCF — Select this when the LCF is installed.
For e-STUDIO282 Series:
Drawer 1 — Select this when the Drawer 1 is installed.
Drawer 1 & LCF — Select this when the Drawer 1 and LCF are installed.
Drawer 1 & 3 — Select this when the Drawer 1 and Drawer 3 are installed.
Drawer 1,3 & 4 — Select this when the Drawer 1, Drawer 3 and Drawer 4 are installed.
Drawer 1 & 2 — Select this when the Drawer 1 and Drawer 2 are installed.
Drawer 1,2 & LCF — Select this when the Drawer 1, Drawer 2 and LCF are installed.
Drawer 1,2 & 3 — Select this when the Drawer 1, Drawer 2 and Drawer 3 are installed.
Drawer 1,2,3 & 4 — Select this when the Drawer 1, Drawer2, Drawer 3 and Drawer 4 are
installed.
LCF is not available for some countries or regions.
The finisher options such as stapling and hole punching can be selected even if you
select "Not Installed" for the Finisher option. If you select the finisher options for print-
ing but the finisher is not installed, finisher settings will be ignored and perform print-
ing correctly.
Automatic Duplexing Unit (e-STUDIO282 Series Only)
Not Installed — Select this when the Automatic Duplexing Unit is not installed.
Installed — Select this when the Automatic Duplexing Unit is installed.
6
Click [Continue].
The printer is added to the Printer List.
Configuring Macintosh Bonjour Printing
1
Start the Printer Setup Utility, located in the "Applications:Utilities"
folder in the Boot Disk.
The Printer List dialog box appears.
154 Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.4.x