Toshiba e-studio 452 Printing Manual page 383

- Non-recommended toner is being used. For information on resolving the error condition,
refer to "REPLACE TONER CARTRIDGE SYMBOL" in Operator's Manual for Basic
Function.
- You need to remove excess staples from the Saddle Stitch Finisher.
- You performed saddle stitch printing using mixed paper sizes.
- Cannot load paper from the LCF.
- Cannot output to inner tray. (Only for e-STUDIO3510c Series, e-STUDIO451c Series,
e-STUDIO452 Series, e-STUDIO282 Series, e-STUDIO4511 Series, e-STUDIO450
Series, and e-STUDIO280 Series).
Cover Open
The Cover Open error icon indicates that you need to close the cover.
Drawer Open
The Drawer Open error icon shows that drawer is open. You must close the specified drawer
to resume printing and copying functions.
Toner Empty
The color of the Toner Empty icon varies depending on which toner cartridge is empty:
- Black — Black Toner Empty
- Cyan — Cyan Toner Empty
- Magenta — Magenta Toner Empty
- Yellow — Yellow Toner Empty
For information on resolving the error condition, refer to "REPLACE TONER CARTRIDGE
SYMBOL" in Operator's Manual for Basic Function.
Toner Full
The Toner Full error icon indicates you need to replace the toner container. For information
on resolving the error condition, refer to "REPLACE TONER BAG SYMBOL" in Operator's
Manual for Basic Function.
Paper Empty
The Out of Paper error icon shows that drawer is empty. A paper out condition does not nec-
essarily terminate a print or copy job. If Auto-select options are configured, printing and
copying may continue by drawing paper from a different drawer. Refer to the TopAccess
online Help for instructions on setting up Auto-Select mode. For information on resolving the
error condition, refer to "ADD PAPER SYMBOL" in Operator's Manual for Basic Function.
TopAccessDocMon Errors 383