Volkswagen Golf Variant 2007 Workshop Manual page 59

– Using a screwdriver, carefully unclip gearbox input speed
sender 3 -G641- from housing in -direction of arrow-.
– Unscrew bolts of mechatronic unit for dual clutch gearbox -
J743- "in diagonal sequence".
"There are 4 long and 3 short bolts."
Do not remove more than 7 bolts!
– Please look carefully to check which bolts you are unscrewing.
Do not unscrew any cover bolts.
The gearbox is shown here again from the side to make this sit‐
uation clearer.
The mechatronic unit must be removed. The cover does not have
to be removed.
Therefore, do not remove more than 7 bolts!
The next step is "difficult":
Now press both engaging levers of dual clutch "away" from plung‐
ers of mechatronic unit. Otherwise, levers will jam mechatronic
unit at plungers and prevent mechatronic unit from being re‐
moved.
– Please read through this description all the way to the end first.
This will help you to perform the following steps "correctly".
Both levers must now be carefully pressed away from the plung‐
ers.
– First take a look at -reddish-brown- engaging lever in this pic‐
ture.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
7-speed dual clutch gearbox 0AM - Edition 07.2010
3. Mechatronic unit for dual clutch gearbox J743
55