Pci Card; Network Interface Controller - NEC Express5800 A2040b Configuration Manual

CONFIGURATION GUIDE

6 PCI Card

Please refer to "Available Slots" of "References" section regarding PCI Slots; Available Slots and Installation
Limitations
PCI Card Customized Configuration Service
Product Name/Description
Customized Service: PCI Cards
NOTE:

When requiring different PCI cards configuration from the standard BTO Configuration at the server
delivery, needs to order this customized service.

Please refer to PCI Card: Priority/Order of Installation for installation rules at BTO configuration.

6.1 Network Interface Controller

Category
GbE
10GbE
NOTE:

Network Interface Controller not pre-installed. Needs to order at least 1 card.

WOL (Wake On LAN) / PXE (Preboot eXecution Environment） boot is supported by 1000BASE-T
Adapter (1 port) (NE3304-138) and 1000BASE-T Adapter (2 port) (NE3304-132.

When booting OS by PXE boot, please select IPv4 for network settings.
NEC Corporation
–
NEC Express5800/A2040b, A2020b, A2010b, A1040b
Product Name/Description
1000BASE-T Adapter (1 port))
Broadcom BCM5718
PCIe 2.0(x4) (Performance: PCIe 2.0(x1))
Low Profile
1000BASE-T Adapter (2 port)
Broadcom BCM5718
PCIe 2.0(x4) (Performance: PCIe 2.0(x1))
Low Profile
1000BASE-T Adapter (4 port)
Broadcom BCM5719
PCIe 2.0(x4), Low Profile
NOTE:
- Network cables with RJ-45 plug covers cannot be used.
10GBASE Adapter (SFP+/2ch)
Broadcom NetXtreme II BCM57711 10G SFP+ Dual Port Network
Interface Card
PCIe 2.0(x8), Low Profile
NOTE:
- NE3304-129 (SFP+ Module (10G-SR)) needs to be ordered per one
port (max. 2)
- Connection with Twinax cable is available. Please refer to the Users
guide for the validated cable
SFP+ Module (10G-SR)
1 x SFP+ Module for NE3304-128
Revision 7.0 – December 2014
Part Number
NE3300-SV401
Part Number
NE3304-138
NE3304-132
NE3304-133
NE3304-128
NE3304-129
37