NEC Express5800 A2040b Configuration Manual page 53

CONFIGURATION GUIDE
2. Memory on the Memory Riser Card (DIMM): Priority/Order of Installation
The priority/order to install DIMM on a Memory Riser Card depends on memory configuration.
Memory Configuration Mode consists of 2; "Independent Mode" for high performance and "Lockstep Mode"
for high availability
Under each mode, there are 2 features to improve availability further; "Memory Mirroring" and "Memory Rank
Sparing".
2-1. Lockstep Mode
"Lockstep Mode" supports Error Detect/Correct toward 2x DRAM failures (DDDC) by having a pair of memory
defined among 2x memory channels (CH0 and CH1 or CH2 and CH3) operating in parallel. To use this mode,
need to order memory set including 2 DIMMs per set.
NOTE:

Cannot mix RDIMM and LRDIMM in a server

Lockstep Mode is a standard setting at the server delivery.
For DIMM installation priority/order, (1) to install larger DIMM first, and (2) to install DIMMs to the sockets in
the priority/order shown in the figure below.
2-2. Independent Mode
"Independent Mode" provides more performance by having 4 memory channels operate independently. This
supports Error Detect/Correct toward 1x DRAM failure (SDDC). To use this mode, need to order memory set
including 2 DIMMs per set.
NOTE:

Cannot mix RDIMM and LRDIMM in a server

Lockstep Mode is a standard setting at the server delivery. To use Independent Mode, need to change
the mode from BIOS set-up menu.
For DIMM installation priority/order, (1) to install larger DIMM first, and (2) to install DIMMs to the sockets in
the priority/order shown in the figure below. Otherwise, memory might not be able to be identified.
DIMM Installation Order for Independent Mode (only) /Lockstep Mode (only)
NEC Corporation
–
NEC Express5800/A2040b, A2020b, A2010b, A1040b
Revision 7.0 – December 2014
53