Nikon DS-L1 Instructions Manual page 150

.MICROSCOPE.
Filter <Shows filter name>
Compatible only with microscopes incorporating the DIH.
1） The menu indicates the name of the current filter in the filter column
NOTE:
*
*
If the microscope connected is a Nikon 90i microscope incorporating the DIH-E, you can use one
of the Nikon-specified default observation methods.
1） Select the icon representing your desired observation method to change microscope
settings for this observation method.
2） The icon representing the current observation method will be marked with a red border.
NOTE:
*
*
<To set the microscope for user setup microscopy>
Before using a specific observation method, you must register it in the microscope. To register
the setting, use the appropriate software installed on the PC connected to your microscope. For
more information on registering, refer to the user's manual for the application. If the names of
observation methods are also registered along with their settings, moving the cursor to one of
the icons representing those numbers will display the name of the observation method under the
cursor in the Info box.
VI Basic Operations
6 Using the Microscope Control
Before using this function, you must set up filter information from a PC with
the setup software. For more information, refer to the instruction manual
for your microscope.
Use microscope control menu 1 to change filters.
Observation method <Sets the observation method>
The default observation method on startup is "BF."
Right-click on any icon representing an observation method to display the
names of all observation methods. You also can select the desired
observation method from within this display to change observation
methods.
- 142 -
.