JVC CX-7000 Series Electronic Manual page 29

Transport Mode Setting
When transporting or moving the printer, ensure that the heating
roller is fastened to a safe position.
Cautions:
Make sure that you set to the transport mode when transporting or
moving the printer. Failure to do so will cause the printer to malfunction.
1
Open the printer door
.
2
Press and hold down the cassette button, and remove the ink ribbon
cassette (on the right) to remove the ink ribbon
.
3
Press and hold down the cassette button, and remove the retransfer
film cassette (on the left) to remove the retransfer film
.
4
Close the printer door
5
Press KNB to reset the printer
.
6
Check to ensure that [Film Search] is displayed on the operation
panel of the printer
7
Press I
A [Cleaning] message appears.
.
8
Press J to set to [Transport Mode]
Pressing it each time displays the next setting item.
.
9
Press B
.
.
After setting to the transport mode, a [Please Power Off] message
appears.
10
Turn off the power, and install the cassette
Cautions:
While in the transport mode, the retransfer film cassette cannot be
installed to the printer with the retransfer film loaded.
Canceling the transport mode
With the printer door closed, turn on the power to cancel the
transport mode.
Operating the Printer
29