JVC CX-7000 Series Electronic Manual page 108

Setup
Screen Configuration
.
A Close button
Closes the status monitor.
B Screen selection tabs
Use these to switch to the following screens.
Printer Status
Displays the printer's status.
Printer Setting
For displaying and specifying the printer's print settings.
For displaying and specifying the printer's device settings.
Retransfer
For displaying and specifying the conditions during retransfer to the
card.
Bend Remedy
For displaying and specifying the conditions during bend remedy of
the card.
Media Setting
Displays the status of the ink ribbon.
For setting the card and retransfer film.
Property
Displays the device configuration.
Displays the firmware version.
Displays the counter value.
Printer Select
For selecting a printer.
For displaying and setting the network connection status.
Security Lock
For displaying and setting the security lock status.
Others
For performing test prints.
For downloading the firmware.
C Minimize button
Minimizes the status monitor to an icon. The icon is displayed in the
taskbar.
108
[Printer Status] Tab
Displays the printer's status. Information on the screen is automatically
updated at regular intervals.
.
Printer Status
Ready mode. The printer is ready to start printing.
.
Cleaning of the card feed roller and heating roller is required.
.
"Card Feed Roller/Heating Roller" (A page 37)
The printer is busy.
.
Failure has occurred. The error code and description of the failure
are displayed. In the example below, "0102D000" is the error code.
.
For more details, refer to "List of Error Codes" (A page 120) .