Security Lock - JVC CX-7000 Series Electronic Manual

Operating the Printer

Security Lock

The security lock function can be applied to the printer door and card
hopper to prevent opening of the printer door as well as removal of
cards.
The lock can be turned on/off using the status monitor on the
computer.
"Status monitor" (A page 117)
By registering a security key number on the printer unit, you can turn
off the security lock by entering the security key number on the
operation panel of the printer.
If you forgot the security key number, please consult our authorized
dealer or the servicing personnel.
Registration of Security Key Number
To change the security key number, you have to delete it and
register a new number again.
1
Press the operation button (center) for at least three seconds
A [Set Sec-Key OK?] message appears.
.
2
Press B
A [New key] message appears.
.
3
Enter a number
.
You can enter up to 8 digits.
Pressing A each time advances to the next number.
Pressing E each time advances to the next digit.
4
Press B
A [Re-enter] message appears.
.
5
Input the number you have entered in [New key] again
.
20
6
Press B
.
If this number is consistent with the number entered in [New key],
the display returns to [Ready], and the security key number is
registered.
If this number is not consistent with the number entered in [New
key], the display returns to [Set Sec-Key OK?]. Enter a number
again.