JVC CX-7000 Series Electronic Manual page 121

Printer (Error Code:0x01040000-0x02000000)
No. Error Code
25 0x01044400 A hardware error has occurred.
26 0x0104AB00 An error has occurred in the mechanical
component of the magnetic encoder.
27 0x0104AC00 A hardware error has occurred in the magnetic
encoder.
28 0x0104C100 A heating roller operation error has occurred.
29 0x0104C200 The temperature of the bend remedy heating
roller or retransfer heating roller is too high.
30 0x0104C300 An internal 24v instantaneous interruption is
detected.
31 0x0104D800 A hardware error has occurred during
initialization.
32 0x0104F000 The temperature of the retransfer heating roller is
too high.
33 0x0104F100 The retransfer heating roller is faulty.
34 0x0104F200 The thermistor of the retransfer heating roller is
faulty.
35 0x0104F300 The temperature of the bend remedy heating
roller is too high.
36 0x0104F400 The bend remedy unit is faulty.
37 0x0104F500 The thermistor of the bend remedy heating roller
is faulty.
38 0x0104F600 The operating ambient temperature of the printer
is too low.
39 0x0104F800 The temperature of the thermal head is too high.
40 A hardware error has occurred.
0x0104RRRR
41 0x01051A00 Printer command is incorrect.
0x01052000
42 0x01052100 A security key has already been set. A new
security key cannot be specified.
43 0x01052200 Entry does not match the preset security key.
44 0x01052300 Security key has not been specified. The security
lock function is not enabled.
45 0x01052400 Printer command is incorrect.
0x01052600
46 0x01052700 Ink ribbon specification is incorrect.
47 0x01052A00 Printer command is incorrect.
48 0x01052B00 Magnetic encoding data is incorrect.
49 0x01052C00 IC encoder is not installed.
50 0x01052D00 Magnetic encoder is not installed.
51 0x01052E00 Optional devices are not installed.
52 A command error has occurred.
0x0105RRRR
0x010BRRRR
53 0x0142A200 Retransfer film has run out.
54 0x0142B200 Ink ribbon has run out.
Description Actions (Reference Page No.)
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.
Check the temperature. If the same problem recurs within the range of
operating ambient temperature, turn off the power and consult our
authorized dealers.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.
Please consult our authorized dealers.
-
-
-
Please consult our authorized dealers.
Ensure that the printer driver's ink setting matches the installed ink ribbon.
(A page 87)
Please consult our authorized dealers.
Check the card specifications.
-
-
-
Please consult our authorized dealers.
Replace with a new one. (A page 33)
Replace with a new one. (A page 32)
Setup
121