JVC CX-7000 Series Electronic Manual page 28

Operating the Printer
Buzzer Setting
For setting whether to sound the buzzer when an error occurs or
when settings are changed.
Settings
On: turns on buzzer sound, Off: turns off buzzer sound
1
Press I
A [Cleaning] message appears.
.
2
Press J to set to [Setting]
Pressing it each time displays the next setting item.
.
3
Press G
A [Display] message appears.
.
4
Press J to set to [Buzzer]
.
5
Press F
Enters the settings change mode.
.
6
Press A and select a setting
7
Press B to confirm the setting
Pressing B confirms the setting and returns you to the previous
screen.
8
Press H to exit the setting mode
Pressing it each time displays the setting item on the next higher
level.
28
Unit Number Setting
For setting the printer's unit number according to the USB
environment.
Settings
No.1 - No.10
1
Press I
A [Cleaning] message appears.
.
2
Press J to set to [Setting]
Pressing it each time displays the next setting item.
.
3
Press G
A [Display] message appears.
.
4
Press J to set to [Unit No.]
Pressing it each time displays the next setting item.
.
5
Press F
Enters the settings change mode.
.
6
Press A and select a setting
You can select the unit number from No. 1 to No. 10.
7
Press B to confirm the setting
Pressing B confirms the setting and returns you to the previous screen.
8
Press H to exit the setting mode
Pressing it each time displays the setting item on the next higher level.
9
Turn off the power
The changes to the setting will be reflected when you turn on the
power again.