Sony TRINITRON KD-34XBR2 Service Manual page 325

z
You can also use the
Video Input option to assign
video inputs to i.LINK devices.
When you select that video
input, an i.LINK connection is
established. Only i.LINK
devices that are set to Show
(see "i.LINK Setup") and
which support video input
connection are listed.
z
For details about using
the i.LINK Control Panel, see
page 44.
z
For details about power
consumption in standby
modes, see "Specifications"
on page 72.
Option Description
Video Input Allows you to select labels to help you recognize devices
connected to the audio/video jacks on the DTV. For
example, if you have a DVD player connected to the
VIDEO 2 jack, you can select the label DVD for the VIDEO 2
input.
To select a label for a video input:
1
Move the joystick V or v to highlight the video input
(VIDEO 1-6) that you want to assign a label. Then
press
2
Move the joystick V or v to highlight one of the
displayed labels. Then press
If you select the label Skip , your DTV skips this connection
when you press the TV/VIDEO button. i.LINK devices
cannot be assigned to VIDEO 5 or 6.
Language
Select to display all on-screen menus in your language of
choice (English, Espanol, Francais).
i.LINK Setup
Select to display a list of i.LINK devices that are connected
to the DTV. To change the status of an i.LINK device:
1
Move the joystick V or v to highlight an i.LINK
device. Then press
2
Move the joystick V or v to highlight one of the
following options. Then press
Show
Hide
Delete
i.LINK Standby On
Off
Using the DTV Menus
to select the input.
to select the device.
Select to display this device in the i.LINK
Control Panel.
Select to not display this device in the
i.LINK Control Panel. This is for devices that
are connected to, but not communicating
with, the DTV (or for devices that you don't
want to appear in the i.LINK Control Panel).
Select for i.LINK devices that you have
disconnected from the DTV. To reconnect the
device, see page 29.
Allows the i.LINK signal to pass through to
connected i.LINK devices even when the
DTV is turned off. Front panel LED is
orange. The DTV uses more standby power
than when this option set to Off .
Does not allow the i.LINK signal to pass
through to connected i.LINK devices when
the DTV is turned off. Front panel LED is
red. The DTV uses less standby power than
when this option is set to On .
to select it.
to select it.
61