Connecting A Dvd Player With A/V Connectors - Sony TRINITRON KD-34XBR2 Service Manual

Connecting a DVD Player with A/V Connectors

Use this hookup if your DVD player does not have component video
out jacks (as shown on page 22).
✍
An S VIDEO connection will give a good-quality video signal, but if your DVD
player has component video, that connection (described on page 22) will give
an even better signal.
1
Using audio cables, connect the DVD player's Audio OUT jacks
to the DTV's Audio IN jacks.
2
Using an S VIDEO cable, connect the DVD player's S VIDEO jack
to the DTV's S VIDEO jack.
S VIDEO
cable
DVD player
Audio cable
To switch between your DTV, VCR and DVD
❑
Use the TV/VIDEO
from one input device to another.
Connecting and Setting Up the DTV
DTV
button on the DTV's remote control to switch
AUDIO-R (red)
AUDIO-L (white)
23