Sony TRINITRON KD-34XBR2 Service Manual page 275

DTV Rear Panel
Connection
1 VHF/UHF
2 CABLE
3 S VIDEO IN 1/3/4
4 VIDEO IN 1/3/4
VIDEO/L(MONO)-AUDIO-R
5 SELECT OUT
6 AUDIO OUT (VAR/FIX)
L(MONO)-AUDIO-R
7 HD/DVD IN
(1080i/720p/480p/480i)
VIDEO IN 5/6
8 CONTROL S
IN/OUT
9 DIGITAL AUDIO
OPTICAL OUTPUT
(DOLBY DIGITAL/PCM)
0 i.LINK S200
qa Service Only
1
3
4
5 6
Description
Connects to your VHF/UHF antenna.
Connects to your cable source.
Connects to the S VIDEO OUT jack of your VCR or other S VIDEO-
equipped video component. Provides better picture quality than the
VHF/UHF jacks or the Video IN jack.
Connect to the audio and video OUT jacks on your VCR or other video
component. A 6th video input (VIDEO 2) is located on the front panel of
the DTV. The Audio and Video IN jacks provide better picture quality than
the VHF/UHF IN jack.
Connect to the audio and video IN jacks on your VCR or other video
component. The output signal is determined by the SELECT OUT setting in
the Setup menu (see page 60).
Connect to the left and right audio inputs of your audio or video
component.
Connect to your DVD player's or digital set-top box's component video (Y,
P , P ) and audio (L/R) jacks.
B R
Allows the DTV to receive (IN) and send (OUT) remote control signals to
other Sony infrared-controlled audio or video components.
Connect to the optical audio input of an audio component that is Dolby
Digital and PCM compatible.
Used for connecting i.LINK equipped devices.
For Sony service use only.
Connecting and Setting Up the DTV
2 7 9
q;
8
qa
11