Sony TRINITRON KD-34XBR2 Service Manual page 19

42. Display a cross-hatch pattern (do not use the monoscope pattern).
43. Remove any slant from the outer vertical lines.
Device Name Adj. Item #
2150D-2 16
* Adjust as necessary to make the outer vertical lines straight up and
down. The LANG adjustment is most effective in the outer areas of
the screen.
44. Write the data to memory.
45. Display a cross-hatch pattern (do not use the monoscope pattern).
46. Remove any bow from all of the vertical lines.
Device Name Adj. Item #
2150D-2 17
* Adjust as necessary to make all of the vertical lines straight up and
down. The VBOW adjustment is effective across the entire screen.
47. Write the data to memory.
Name Data
LANG *
Name Data
VBOW *
— 19 —
48. Display a cross-hatch pattern (do not use the monoscope pattern).
49. Remove any bow from the outer vertical lines.
Device Name Adj. Item #
2150D-2 18
* Adjust as necessary to make the outer vertical lines straight up and
down. The LBOW adjustment is most effective in the outer areas of
the screen.
50. Write the data to memory.
This completes the FULL mode Size and Geometry adjustments.
Note: Many of the adjustments in this section are shared with
the other display modes (NORMAL, ZOOM, WIDE ZOOM, and
TWIN). When adjusting these modes as described in the following
sections, be sure to adjust only those items specifi cally listed for
each mode.
KD-34XBR2
Name Data
LBOW *