Sony DCR-TRV240 Service Manual page 71

[SERVICE POSITION TO CHECK THE CAMERA SECTION]
Connection to Check the Camera Section
To check the camera section, set the camera to the "Forced camera power ON" mode.
When you want to operate to zoom and focus, use the controls on the remote commander (with the HOLD switch off).
Setting the "Forced Camera Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 01 and
press the PAUSE button of the adjustment remote
commander.
Note : If the machine malfunctions (the operating mode changes by itself), connect the Cabinet (R) section.
Control switch block
(SS-1380) (12P)
Mechanism deck
FP-161 flexible
board (16P)
CD-357 board
Lens section
Iris flexible
assembly (24P)
FP-411
flexible board
SI-032 board
VC-276
board
FP-410
FP-406 flexible
flexible board
board (30P)
Harness
(PD-117) (20P)
LANC
jack
Adjustment remote
commander (RM-95)
Exiting the "Forced Camera Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote
commander.
4) Select page : 0, address: 01, and set data: 00.
Battery panel
section
DC IN
Battery terminal
board (6P)
2-11
DCR-TRV240/TRV340
AC POWER
ADAPTOR
Control switch block
(CF-2500) (22P)
Cabinet (R) block section
AC IN