2-2. FRONT PANEL SECTION, SI-032 BOARD
1
4 Two MI screws
(M2 × 4) (H)
5 Claw
Remove it while taking
2 MI screw
(M2 × 4) (H)
care as the FP-406 flexible
cable is connected.
7 Front panel
section
[SI-032 BOARD SERVICE POSITION]
FP-411 flexible
board
SI-032 board
Push the eject knob in
the direction of the arrow A ,
and open the cassette lid.
3 MI screw
(M2 × 4) (H)
6 FP-406 flexible
REMOVING THE SI-032 BOARD
board (30P)
3 Tapping screw
(M1.7 × 5)
2 Two tapping
screws
(M1.7 × 5)
1 Cushion (1), F
q; Microphone retainer
8 Sheet microphone
7 Tapping screw
(M1.7 × 5)
5 Tapping screw
(M1.7 × 5)
AC POWER
ADAPTOR
DC IN
FP-406 flexible
board (30P)
A
When removing Front panel section, do not
press down the drum of mechanism deck.
4 Remove the FP-411 flexible board
in the direction of the arrow B .
B
qf Microphone
Cushion (F)
qd Microphone
holder
qa Microphone (4P)
qs Microphone
9 Two claws
6 SI-032 board
AC IN
2-3
DCR-TRV240/TRV340
The drum of
mechanism deck.
qg Front panel
assembly (24)
Microphone retainer (rear view)
Microphone
holder
Microphone
When removing it, be careful not
to damage the harnesses, etc.