Chapter 6 Operation Method; Connecting A Camera Head; Installing Application Software - Nikon DS-U2 Instructions Manual

Connecting a Camera Head

1
The DS-U2 is applicable for eight models of camera heads listed below.
The control unit (DS-U2) mode is automatically switched by changing the camera head.
DS-Fi1
DS-5M
DS-5Mc
DS-2Mv
DS-2MBW
DS-2MBWc
DS-Qi1Mc
DS-Ri1
Refer to "Specifications" in Chapter 9 for details on those cameras.

Installing Application Software

2
To operate the DS-U2, an application software must be installed in the PC connected to the DS-U2
via a USB interface.
To use the NIS-Elements freeware package, insert the enclosed CD-ROM in the PC and install it in
the following procedures.

Chapter 6 Operation Method

1 Connecting a Camera Head
5-megapixel CCD / color
5-megapixel CCD / color
5-megapixel CCD / color
2-megapixel CCD / color
2-megapixel CCD / monochrome / non-cooled
2-megapixel CCD / monochrome / cooled
1-megapixel CCD / monochrome / cooled
1-megapixel CCD / color
- 17 -
Operation Method
/ non-cooled
/ non-cooled
/ cooled
/ non-cooled
/ cooled / pixel-shift
6