Flow Gauge; 2-In-1 Water Tank; Easy To Remove And Clean Nozzle; Readytools Dial - WERTHEIM SE9000 Instruction Manual

FLOW GAUGE

The fl ow gauge is located on the rear cover of your unit and is a
convenient performance feedback indicator. The fl ow gauge will
spin when the trigger is depressed and:
• There is liquid in both the clean water tank and the formula tank
OR
Flow Gauge
• Custom Clean is set to rinse and there is water in the clean tank.
The fl ow gauge will stop spinning when:
CleanShot
™
• The trigger is let go
• The unit runs out of clean water
• The unit runs out of cleaning formula
Dry Aire
™

2-IN-1 WATER TANK

Our 2-in-1 water tank full capacity system is designed with
a heavy duty bladder inside for clean water. As you clean, the
clean water in the bladder will empty and mix with the cleaning
formula. Dirty water pulled out of your carpets will collect
around the outside of the bladder so that clean and dirty water
are always kept separate. This allows the user to maximize tank
space, yet only carry one tank to and from the sink for emptying
and fi lling.

EASY TO REMOVE AND CLEAN NOZZLE

Now, cleaning up your machine after the cleaning process is easier than ever! Simply remove
the 2-in-1 water tank and remove the screw to pop out the nozzle for rinsing in the sink.
Dirt, loose carpet fi bers and remaining pet hair or fuzz get washed away in a snap.
READYTOOLS™ DIAL
This provides either fl oor cleaning or above fl oor cleaning with
the turn of a knob. If choosing above fl oor cleaning for
upholstery, stairs, or for those creases close to the baseboards,
turn knob to "TOOLS" and choose the attachment appropriate
for the job. Attach tool to the fl ex hose and you are ready to go.
Be sure to turn knob back to "FLOOR CLEANING" when done.
8