WERTHEIM SE9000 Instruction Manual
  1. Manuals
  2. Brands
  3. WERTHEIM Manuals
  4. Floor Machine
  5. SE9000
  6. Instruction manual

WERTHEIM SE9000 Instruction Manual

Shampoo extractor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Shampoo Extractor
SE9000

Advertisement

Table of Contents
loading

Summary of Contents for WERTHEIM SE9000

  • Page 1 Shampoo Extractor SE9000...
  • Page 2 Congratulations on your purchase of your new Wertheim Steam Mop. Please carefully read this instruction book, and keep it available for future use, so that you may take best advantage of the many useful features of the Wertheim Steam Mop. BEFORE YOU BEGIN BEFORE YOU BEGIN This product must be operated in accordance with these instructions.
  • Page 3 22. Do not use for any purpose other than described in this User’s Guide. 23. Use only manufacturer’s recommended attachments. 24. Use only cleaning products formulated by Wertheim for use in this appliance to prevent internal component damage. 25. Keep openings free of dust, lint, hair, etc.
  • Page 4 SE9000 SE9000 Spray Trigger CleanShot™ Trigger Heater Switch Power Switch Custom Clean™ Dial Flex Hose Upper Handle Easy To Carry Handle Heat Indicator Light Lower Base Detent Pedal ReadyTools™ Dial Tank Carry Handle 2-in-1 Water Tank CleanShot™ Easy To Remove Nozzle Dry Aire™...
  • Page 5 Spray Trigger Tough Stain Brush Hose Rack Spray Trigger TurboBrush™ Lower Handle 709mL Professional Deep Cleaning Advanced Formula #61100979 Lower Base Detent Pedal Formula Tank...
  • Page 6 ASSEMBLY ASSEMBLY Your SE9000 comes in three, easy to assemble components: Upper Handle Lower Handle Tool Caddy The only thing you will need to assemble your cleaner is a Phillips head screwdriver. Slide upper handle onto lower handle. 2. Screw 3 screws into the marked holes.

  • Page 7: Special Features

    SPECIAL FEATURES SPECIAL FEATURES Your Wertheim SE9000 deep cleaner is a home cleaning system that uses the power of heat, brushes and cleaning formula to get the deep down dirt for a maximum clean. Not only does it come with a lot of unique features, it has been designed with you, the customer, in mind.
  • Page 8 FLOW GAUGE The fl ow gauge is located on the rear cover of your unit and is a convenient performance feedback indicator. The fl ow gauge will spin when the trigger is depressed and: • There is liquid in both the clean water tank and the formula tank Flow Gauge •...

  • Page 9: Before You Clean

    OPERATION OPERATION BEFORE YOU CLEAN Plan activities to give your carpet time to dry. 2. Move furniture to another area if cleaning an entire room (optional). 3. Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning. 4. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit 5.
  • Page 10 Remove formula tank from back of machine. 8. Fill the formula tank by fi rst unscrewing the cap and insert. Always use genuine Wertheim formulas to maximize cleaning and for the safety of your machine. Fill water up to “water line and then fi...
  • Page 11 11. Plug into a proper outlet and turn the power and heater switches to the ON ( I ) position. Allow 1 minute for the built-in heater to warm-up before cleaning. The SE9000 will be fully warmed and will provide optimal performance after one minute of continuous heated cleaning.
  • Page 12 17. Lift the bottom portion of the tank; pour out dirty water toward the sink through the triangular shaped opening in the corner of the tank. Note: You may notice hair & debris deposits on the carpet or in the tank that were loosened by the cleaning action (especially with newer carpets that have never been deep cleaned before).

  • Page 13: Cleaning With Attachments

    A. Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your SE9000. If the tag is coded with an “X” or an “S” (with a diagonal stripe through it), or says “Dry Clean Only”, do not proceed with any deep cleaning machine. Do not use on velvet or silk.
  • Page 14 9. It is recommended that you suction clean water from the tap to rinse out the hose. 10. Before replacing lift end of hose and stretch out to ensure all water is cleared from hose. 11. Coil fl ex hose around the tool caddy. 12.
  • Page 15 CLEANING FLUID Keep plenty of genuine Wertheim Advanced Cleaning Formula on hand so you can clean and protect whenever it fi ts your schedule. Always use genuine Wertheim deep cleaning formulas. WARNING To reduce the risk of fi re and electric shock due to internal component damage, use only Wertheim cleaning formulas intended for use with the deep cleaner.
  • Page 16 STAIN REMOVAL Do Not Delay! Attending to an accident soon after it occurs ensures the most optimal clean. Leaving it for an extended period of time may cause it to set and become permanent. Blot up liquids with an absorbent cloth or paper towels. White materials are recommended because certain dyes may bleed and make the stain worse.
  • Page 17 MAINTENANCE & CARE MAINTENANCE & CARE MACHINE STORAGE Once your cleaning is complete, make sure the 2-in-1 water tank is emptied, rinsed out, and dried before the next use. The formula tank can remain fi lled and ready to go, or it can simply be emptied back into the formula bottle if that is more convenient.

  • Page 18: Small Belt Removal/Replacement

    SMALL BELT REMOVAL & REPLACEMENT Occasional replacement of one or both belts may become necessary. If that is needed, please follow the instructions below. Turn off the machine, and unplug it from the outlet. 2. Remove both the 2-in-1 water tank and the formula tank. Set aside. 3.

  • Page 19: Brush Removal/Large Belt Replacement

    BRUSH REMOVAL & LARGE BELT REPLACEMENT Brushes can be removed for cleaning or replacement as needed. Follow small belt removal Instructions on page 18. 2. Remove brush rolls by pulling them off of the metal rods. 3. Place cleaned or new brush rolls back onto the rods. Make sure one washer is on each end of the rollers prior to sliding onto the rod.

  • Page 20: Troubleshooting

    • Fill heavy duty bladder empty. with hand hot tap water. • Formula tank may be empty • Fill formula tank with Wertheim Advanced Cleaning Formula for cleaning. Reduced Spray or No Spray • 2-in-1 Water tank may not be •...
  • Page 21 • ReadyTools dial may be at • Set ReadyTools dial wrong setting. to either FLOOR CLEANING of TOOLS setting. • 2-in-1 water tank may not be • Pick up both the seated properly. 2-in-1 water tank and formula tank and reseat them so they fi...
  • Page 22 PRODUCT SPECIFICATIONS PRODUCT SPECIFICATIONS MODEL MODEL SE9000 9000 Rated Voltage 220-240V~, 50Hz Max. Power Consumption 1850W Weight of Body 13kg Capacity of Water Tank 600mL Duration of Use Approx. 30min Length of Cord...
  • Page 23 This guarantee applies in Australia and New Zealand only. For the guarantee in another country, please contact your local retailer/distributor. Your new Wertheim cleaner which has or failure to follow the instructions makes been fully tested, inspected and adjusted, this guarantee void.

Table of Contents