Assembly - WERTHEIM SE9000 Instruction Manual

ASSEMBLY

ASSEMBLY
Your SE9000 comes in three, easy to assemble components:
Upper Handle
Lower Handle
Tool Caddy
The only thing you will need to assemble your cleaner is a Phillips head screwdriver.
1. Slide upper handle onto lower handle.
2. Screw 3 screws into the marked holes.
3. Place upper hose rack onto back of upper handle, and secure with tapered screw.
4. Place lower hose rack onto back of upper handle by pushing in and sliding down until
it snaps into place.
5. Snap tools into the tool caddy as shown in.
6. Wrap power cord and fl ex hose as shown in
7. Keep fl ex hose snugly in place by using the hose secure latch.
6
1
Crevice Tool
Holder
TurboBrush
4
2
Tough
Stain Brush
Spraying
Crevice Tool
Hose Secure
Latch
5
3
6