WERTHEIM SE9000 Instruction Manual page 21

Cleaner not picking up
solution
Other maintenance or service not included in the manual should be performed by an
authorised service representative.
• ReadyTools dial may be at
wrong setting.
• 2-in-1 water tank may not be
seated properly.
• 2-in-1 Water tank may not be
assembled properly.
• Solution or 2-in-1 water tank
is empty.
• 2-in-1 water tank has picked
up maximum dirty water and
red fl oat door has closed.
• Red fl oat "door" in the tank
may have closed as a result of
bumping an object or moving
machine back and forth too
quickly
• Set ReadyTools dial
to either FLOOR
CLEANING of TOOLS
setting.
• Pick up both the
2-in-1 water tank
and formula tank and
reseat them so they fi t
snugly on the unit.
• Check to make sure
the "lip" of the nozzle
is securely hooked into
the groove on bottom
of Tank (see page 9).
• Check fl uid levels in
heavy duty bladder and
formula tank.
• Empty 2-in-1 water
tank. Refi ll heavy duty
bladder with clean
hand hot tap water
and replace.
• Turn the machine OFF,
allowing red fl oat door
to release into the
open position. Turn
the unit back ON to
continue cleaning. Be
sure your forward and
backward strokes are
done at a slower pace.
21