Cisco 2500 Series Deployment Manual page 11

In above output, management and AP−manager are not bounded. In this scenario, multiple AP−managers can
be created in a different subnet from the management interface and mapped to different physical ports.
Note: Internal DHCP server will only work (for wireless clients) with DHCP proxy enabled.
Some of the scenarios supported by the Cisco 2500 Series Wireless Controller are described here with sample
configurations.
Scenario 1
Management interface with embedded AP−Manager is configured on Port 1. Two WLANs are configured on
the controller. WLAN 1 and WLAN 2 are mapped to the management interface.
A simple topology has the Cisco 2500 Series Wireless Controller connected to a Catalyst 3560 switch. Gigabit
Ethernet port 1 on the controller is connected to Gigabit Ethernet port 1/0/1 on the switch.
Switch#sh run int gig 1/0/1
Building configuration...