Enable Dtls In The Cisco 2500 Series Controller - Cisco 2500 Series Deployment Manual

(Cisco Controller)
The show license all command displays the installed licenses.
Note: This license includes a data DTLS functionality.
(Cisco Controller) >show license all
(Cisco Controller) >show license all
License Store: Primary License Storage
StoreIndex:
License Type: Permanent
License State: Active, In Use
License Count: 50/50/0
License Priority: Medium
StoreIndex:
License Type: Permanent
License State: Active, In Use
License Count: Non−Counted
License Priority: Medium
License Store: Evaluation License Storage
StoreIndex:
License Type: Evaluation
License State: Active, Not in Use, EULA accepted
License Count: Non−Counted
License Priority: Low
StoreIndex:
License Type: Evaluation
License State: Inactive
License Count: 50/0/0
License Priority: None
(Cisco Controller) >

Enable DTLS in the Cisco 2500 Series Controller

In order to enable DTLS on an AP or particularly on a group of APs, make sure that you have Data
Encryption License installed in the controller. DTLS (Data Encryption) can be enabled on a per AP basis from
the Advanced tab once you select the AP details.
Choose an AP, go to the Advanced tab, and choose the Data Encryption option.
2 Feature: base−ap−count
3 Feature: data encryption
0 Feature: base
Evaluation total period:
Evaluation period left:
1 Feature: base−ap−count
Evaluation total period:
Evaluation period left:
Version: 1.0
Version: 1.0
Version: 1.0
8 weeks 4 days
8 weeks 4 days
Version: 1.0
8 weeks 4 days
8 weeks 4 days