Internal Dhcp Server With Dhcp Proxy Enabled - Cisco 2500 Series Deployment Manual

2 WLAN2 / WLAN2
<CISCO2504> >

Internal DHCP Server with DHCP Proxy Enabled

The DHCP server TestVlan10 is configured on the controller and this scope will service APs and clients. The
DHCP server configuration on the controller is simple.
<CISCO2504> >show dhcp summary
Scope Name
TestVlan10
<CISCO2504> >show dhcp detailed TestVlan10
Scope: TestVlan10
Enabled................................... Yes
Lease Time................................ 36400 <10 hours 6 minutes 40 seconds>
Pool Start................................ 10.10.10.100
Pool End.................................. 10.10.10.200
Network................................... 10.10.10.0
Netmask................................... 255.255.255.0
Default Routers........................... 10.10.10.10
DNS Domain................................
DNS....................................... 0.0.0.0
Netbios Name Servers...................... 0.0.0.0
<CISCO2504> >
This is the DHCP configuration capture using the GUI from the Cisco 2500 Series Wireless Controller:
The DHCP Proxy is enabled on all Cisco controllers by default.
Enabled
Enabled Address Range
Yes 10.10.10.100 −> 10.10.10.200
management
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0