All Clear (Action In The Event Of Abnormality) - Canon PC-D320 Service Manual

PC-D320/PC-D340/FAX-L400 Chapter 3: Assembly and Disassembly

1.4 All Clear (Action in the Event of Abnormality)

In the event of extreme noise or shock, etc., in very rate cases, the display may go out, and all
the keys become inoperable. In that case, perform an All Clear.
This operation returns all values and settings to their default settings. However, as all settings,
such as user data and service data, etc., will be re-initialized, be sure to note down any settings
that you will need to re-enter later.
Data Registration
OK
#12 CLEAR
CLEAR OK
DISPLAY LANGUAGE
< ENGLISH
COUNTRY SELECT
UK
: FAX-L400 onry
While waiting to return to the ready state after executing "All clear", please
do not press the stop button. Doing so may cause a malfunction afterwards.
In the case of PC-D320/D340, if you execute "All Clear", the setting, #5
TYPE in SERVICE MODE will be set up to U.S.A.. Therefore, be sure to
change #5 TYPE to a setting that is suitable for each country/region after "All
Clear".
In the case of FAX-L400, execute "All Clear" by following the steps on the
display, and set up DISPLAY LANGUAGE and COUNTRY SELECT to
settings that are suitable for each country/region.
Display #12 CLEAR by
#
pressing
Display ALL by
pressing or button
PLEASE WAIT
Select language by
pressing
>
Select country by
pressing
Figure 3-1 All Clear Operation
3-4
SERVICE MODE
#12 CLEAR
or button
#12 CLEAR
ALL
OK
or button
OK
or button
OK
Standby