Related Manuals for Canon PCL PRINTER KIT-Jl
Summary of Contents for Canon PCL PRINTER KIT-Jl
- Page 1 All manuals and user guides at all-guides.com PCL PRINTER KIT-J1 Installation Procedure Follow the instructions herein when installing the PCL PRINTER KIT-J1 to its host E N G L I S H machine. PUB No.F-IM-6472-000 PRINTED IN JAPAN or CHINA...
-
Page 2: Checking Components
All manuals and user guides at all-guides.com 1.1 Checking components 1.1.1 Checking the Contents F-1-1 32MB ROM 1 pc. 256MB RAM 1 pc. Screw (binding; M3x4) 1 pc. User software CD-ROM 1 pc. Release Note 1 pc. User's Manual CD-ROM 1 pc. -
Page 3: Installation Procedure
All manuals and user guides at all-guides.com 1.2 Installation procedure 4) If a Super G3 Fax Board-T1 is found, disconnect the connector [1] of the IP-modem cable. 1.2.1 Mounting to the Host Machine If an optional Super G3 Fax Board-T1 is found, the SDRAM and the super capacitor remain powered to 1) Turn off the main power switch, and disconnect the back up the image memory (even after the main power... - Page 4 All manuals and user guides at all-guides.com 6) Remove the 128MB RAM [1] in the direction of [A]. - 2 locking levers [2] (shift in the direction of [B]) F-1-8 F-1-6 8) Disconnect the soft ID cable [1]. - 1 cable clamp [2] 7) If a UFRII LT PRINTER KIT-J2 is installed, perform steps 7-1) and 7-2).
- Page 5 All manuals and user guides at all-guides.com 10) Remove the IP cover [1]. 12) Connect the connector [1] of the 32MB ROM to - 10 screws [2] the connector [2] of the IP PCB. - 1 screw (binding; M3x4) [3] F-1-13 13) Attach the IP cover you removed in step 10).
- Page 6 All manuals and user guides at all-guides.com 14) Put all the parts that you have removed back in 16) Mount the 256MB RAM [1]. place. - cable guide - soft ID cable - IP-LAN cable (if a UFRII LT PRINTER KIT-J2 is mounted) 15) Attach the LAN cover removed in step 7-1).