Canon PC-D320 Service Manual page 97

c) ERROR CODE LIST
The error codes that have newly been added starting with the product are identified by the
notation "New" ; those error codes for which remedies unique to the product are offered are
identified by the notation "UNQ (UNIQUE)" .
• User error code
No. Tx or Rx
UNQ #0001 [TX
UNQ #0003
[TX/RX]
UNQ #0005
[TX/RX]
#0006 [TX
[RX
#0008 [TX
UNQ #0009
[RX
#0011 [RX
#0012 [TX
#0018 [TX/RX]
#0021 [RX
#0022 [TX
#0025 [TX/RX]
#0033 [TX
#0034 [TX
#0035 [TX
#0036 [TX
#0037 [RX
#0039 [TX
#0054 [TX/RX]
#0056 [RX
#0057 [RX
#0058 [RX
#0059 [TX
#0080 [TX
#0081 [TX
#0082 [RX
#0083 [RX
#0084 [RX
#0099 [TX/RX]
#0995 [TX/RX]
PC-D320/PC-D340/FAX-L400 Chapter 4: Maintenance and Service
Definition
] Document has jamed
Document is too long, or page time-over
Initial identification (T0/T1) time-over
] Transmission cannot be made
] Phase synchronization fails in OLD-FM
] Password does not match for polling transmission
] Recording paper has jamed or the recording paper has run out
] Polling reception error
] The other party has run out of recording paper
Auto dialing transmission error
] The other party has rejected the machine during polling
reception
] Call fails
Auto-dial setting is wrong
] Confidential transmission cannot be used
] Transmission to the confidentical mailbox of the other party
cannot be made in confidential transmission
] Relay control transmission cannot be used
] Relay control transmission cannot be made
] Memory has overflowed when receiving images
] Closed network transmission fails
Call cannot be made
] Recording paper feed fault
] Recording paper feed fault
] Recording paper feed fault
] Dialed number and the connected number (CSI) do not match
] The other party is not equipped with an ITU-T-compliant
subaddress reception function
] The other party is not equipped with an ITU-T-compliant
password reception function
] The other party is not equipped with an ITU-T-compliant
selective polling transmission function
] Selective polling address or the password does not match
during ITU-T-compliant selective polling reception
] The other party is not equipped with a password function
for ITU-T-compliant selective polling reception
Stop button was pressed during a communication
Memory transmission reservation clear/memory reception
image clear
4-17