Ultimarc Aim-trak Setup Manual page 24

The mouse cursor is jumping all over the place and behaving erratically
• There may be a bright point light source interfering with the AimTrak. It may be in
the line‐of‐sight of the gun, or reflecting off of your monitor screen. Try turning the
room lights off or lowering the blinds to see if it improves.
Note normal room lighting will not affect the gun. It will only be affected by very bright
point sources which are in view of the gun. Fluorescent lighting will not affect the gun at
all.
The mouse cursor is "jumpy" and does not move smoothly.
• The cursor may appear jumpy if the Tilt/Z Compensation is set to CONTINUOUS (See
section 1.2 above). Although the mouse cursor appears "sketchy", it should not
affect your gameplay.
http://www.ultimarc.com Page 24