Advertisement
Quick Links
Advertisement
Related Manuals for Ultimarc AimTrak
Summary of Contents for Ultimarc AimTrak
- Page 1 AimTrak Playstation 2 User Guide http://www.ultimarc.com...
-
Page 2: Table Of Contents
PS2 lightgun games to be played on an LCD TV, the GunCon45 and GunCon2 lightguns will only work on a CRT TV. Please note that not all games will work with AimTrak as the principle of operation is very different to the original CRT-based guns. -
Page 3: Buttons And Wiring
Trigger If you have bought the OEM electronics AimTrak kit then you will need to have wired up the Trigger, Aux and P1 connectors for the lightgun to work properly with Playstation 2. -
Page 4: Setup Guide
Time Crisis 2 or Time Crisis 3). 4) With the Playstation 2 turned off, hold down the A and B buttons together on your AimTrak lightgun and switch your Playstation 2 on. Hold the A and B buttons down until you see the startup screen and hear the startup sound, this is required to turn the lightgun into GunCon mode (this will need to be done on both lightguns if two are being used). -
Page 5: Games
The following lists the Playstation 2 GunCon45 and GunCon 2 compatible lightgun games. Not all games have been tested and unfortunately not all work with AimTrak at the moment. All testing has been performed using a PAL (UK) Playstation 2, a 22” LCD TV and an AimTrak module with firmware version 8.11. -
Page 6: Troubleshooting
Note that calibration data is retained by the AimTrak I can get the AimTrak to start calibration, but it won’t register all my shots (or it keeps repeating the same spot) Calibration will not complete if the sensor in the gun cannot see the LED bar at all gun-aim locations within the screen boundary.