Ultimarc Aim-trak Setup Manual page 20

Lightgun Games – 2 or more Buttons
Key:
Game has additional in‐game calibration settings that can be accessed by pressing F2
during a game. It may not be necessary to calibrate in‐game, unless otherwise
noted.
Game may require you to hold down the trigger for auto‐fire. This will cause the
AimTrak calibration routine to invoke after 5 seconds, unless you change the time or
disable calibration for this button as shown above (Advanced Settings).
Game requires you to shoot off‐screen to reload your weapon. The Trigger should be
assigned the same button for On Screen and Off Screen (see Advanced Setup above).
Button 2 is required to reload the gun in the game.
Game Name romname
Beast Busters bbusters
Born To Fight borntofi
CarnEvil carnevil
Crypt Killer cryptklr
Deer Hunting deerhunt
USA
Dragon Gun dragngun
Golgo 13 Golgo13
Golgo 13 Kiseki G13knd
no Dandou
GunBuster gunbustr
Judge Dredd jdredd
Laser Ghost lghost
Lethal Enforcers 2 le2
Line of Fire loffire
Mechanized Attack mechatt
Mobil Suit Gundam gdfs
Final Shooting
Key Notes
From mamedev.org: For the game to work properly, you
need to calibrate ALL 3 guns! If you try to do only one, as
the manual states, the eprom has invalid gun data and the
screen go black after rebooting. Fire at indicated spots with
P1, P2 and P3 controls. Only then will a proper eprom be
made.
Requires in‐game calibration through the F2 setup menu
before it will work correctly. It should only be required the
first time you run the game.
Reload required before every shot.
From mamedev.org: The first time you run the game, you
must perform the typical Konami F2+F3 procedure to
properly initialize the EEPROM. The problem is this game
does not currently give any types of feedback like the other
Konami games (due to video problems). Simply hold F2
down, hit F3 ‐ continuing to hold F2 for a couple of seconds
to make sure it takes. Shortly thereafter, you should see a
test pattern on screen signifying it worked.
Go into Dipswitches and change "Light Gun Calibration" to
On. Make sure that "Controls" is set to "Light Gun". Reset
http://www.ultimarc.com Page 20