Configuration; Ups Settings - PowerStar SMX2000RMLV2U Operation Manual

Configuration

UPS Settings

Start-up Settings
Use the display interface to configure these settings at initial start-up. The unit will prompt for a response
to each setting, if not response is given, it will use the default setting.
Note: The until will not turn on until all of these settings are entered.
Function Factory Default
Language English
Output Low Voltage: 120 V • 100
Voltage
High Voltage: 230 V • 200
Input Power Good
Quality
Menu Type Standard
Date UPS manufacture
date + 90 days
Shipboard power is enable by turningon the shipboard breaker first to apply power
8
Options Description
• English The language for the display interface.
• French*
• German* *Language options will vary by model.
• Spanish*
• Italian*
• Portuguese*
• 110
• 120
• 127
Set the nominal output voltage of the UPS is off.
• 208
• 220
• 230
• 240
• Good Select the quality of input utility power.
• Fair • If Good is selected, the unit will go on battery
• Poor
• If Poor is selected, the UPS will tolerate more
Standard or The advanced menus include all parameters. The
Advanced Standard menus display a limited set of menus and
options.
mm-yyy Enter today's date.
Smart-UPS X-Series 2000/2200/3000 VA Operation
power more often to provide the cleanest power
supply to the connected equipment.
fluctuations in power and will go on battery power
less often.
If unsure of the local power quality, select Good.