Roland LEC-300 Supplement Manual page 16

Installing the Ink Cartridges (LEC-330 / LEC-540 / LEJ-640)
2.
Clean the print heads using the SOL INK cleaning cartridge.

SELECT INK TYPE
ECO‑UV CMYKGlGl
ECO-UV gloss/gloss mode
SELECT INK TYPE
ECO‑UV CMYKWW
ECO-UV white/white mode
SELECT INK TYPE
ECO‑UV CMYKGlW
ECO-UV gloss/white mode
SELECT INK TYPE
ECO‑UVS CMYKWW
ECO-UVS ink mode

INSTALL
DRAIN BOTTLE

SET CL-LIQUID
1 2 3 4
FILLING INK...
>>

REMOVE CL-LIQUID
1 2 3 4
SET CL-LIQUID
5 6
FILLING INK...
>>>>
14
Check the selected ink mode.
<When the selected ink mode is enabled>
Press .
<When an incorrect ink mode is enabled>
Switch off the sub power.
Again carry out the procedure on page 11, "Selecting the Ink Mode."
Make sure the drain bottle is installed.
Press .
Insert the SOL INK cleaning cartridges into slots 1, 2, 3, and
4.
When this screen appears, pull out the SOL INK cleaning
cartridges.
Insert the SOL INK cleaning cartridges you pulled out into
slots 5 and 6.