Sony DCR-TRV103 Service Manual page 38

2-7. VF-129 BOARD (B/W EVF MODEL)
4 Finder (S) assembly
3 Rotate it in the direction of
the arrow b and remove it
in the direction of the arrow c .
c
b
7 Remove
the claw
!∞ EVF cabinet (upper B) (95)
assembly
!™ Two tapping
screws (B2 × 5)
!§ Tapping
screw (B2 × 5)
!¶ EVF tally
!¢ EVF cabinet (lower B) (95)
[B/W EVF CHECK SERVICE POSITION]
FP-77 flexible board (22P)
Panel (N) (front) assembly
a
!º
2 Slide the button in the
direction of the arrow a .
8 FFC-256
flexible flat cable (4P)
Tilt lock (93)
9 VF base(B)(95)
5 Harness guide
!£ FFC-256
flexible flat cable (4P)
!ª CRT assembly
!• VF-129 board
!¡ Tapping screw (B2 × 5)
Adjustment remote
commander (RM-95)
LANC jack
3
- 2 1
V C
FFC-236 flexible
flat cable (50P)
1 Screw
6 Two screws
(M2 × 3)
[How to remove the CRT unit]
@¡ CRT socket (4P)
@º CRT DT connector (4P)
CPC-13 jig
(J-6082-443-A)
AC POWER
ADAPTOR
DP-74 harness (10P) (2.5 INCH LCD MODEL)
DP-75 harness (10P) (3.0/3.5 INCH LCD MODEL)
Note: the TR models do not have the harness
(DP-74 or DP-75)
FFC-256 flexible flat cable (4P)
Cabinet (R) assembly
2-7
@¢ CRT
@£ Anode cable (1P)
Do not pull the cable,
but remove it in the vertical
direction.
@™ Remove the connector
cover with a flat head (–)
screwdriver.
CPC-13 jig
Insulater
side
DC IN
AC IN
CRT assembly
VF-129 board