Sony DCR-TRV103 Service Manual page 117

9. Auto White Balance Standard Data Input
Subject Clear chart
(Color reproduction adjustment frame)
Adjustment Page F
Adjustment Address 32 to 35
Note 1: This adjustment should be carried out upon completion of "6. Color
Reproduction Adjustment".
Note 2: Check that the data of page: 6, address: 02 is "00". If not, select
page: 6, address: 01, set data: 00, and press the PAUSE button of
the adjustment remote commander.
Switch setting:
1) NIGHT SHOT .................................................................. OFF
2) DIGITAL ZOOM (Menu display) ................................... OFF
3) STEADY SHOT (Menu display) ..................................... OFF
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Wait for 2 seconds.
3) Select page: 6, address: 01, set data: 11, and press the PAUSE
button of the adjustment remote commander.
4) Select page: 6, address: 01, set data: 0D, and press the PAUSE
button.
(When the standard data is take in, the data will be automatically
input to page: F, address: 32 to 35.)
5) Select page: 6, address: 02, and check that the data is "01".
6) Perform "Auto White Balance Adjustment".
Processing after Completing Adjustments
1) Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjustment remote commander.
2) Select page: 0, address: 01, and set data: 00.
10. Auto White Balance Adjustment
Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproducibility will
be poor.
Subject
Filter
Measurement Point
Measuring Instrument
Adjustment Page
Adjustment Address
Specified Value
Note 1: Perform "Auto White Balance Standard Data Input" before this
adjustment.
Note 2: Displayed data of page 1 of the adjustment remote commander.
1 : XX : XX
Note 3: 720H model:DCR-TR7000/TRV103/TRV110/TRV110P/
TRV203/TRV210/TRV310/TRV310P/TRV315
960H model: DCR-TR7000E/TR7100E/TRV110E/TRV210E/
TRV310E
Switch setting:
1) NIGHT SHOT .................................................................. OFF
2) DIGITAL ZOOM (Menu display) ................................... OFF
3) STEADY SHOT (Menu display) ..................................... OFF
Adjusting method:
1) Place the C14 filter for color temperature correction on the lens.
2) Select page: 0, address: 01, and set data: 01.
3) Select page: E, address: 88 to 8B, and note down the data of
each address.
4) Input the following data to page: E, addresses:88 to 8B.
Address
Data 720H model
960H model
Note: Press the PAUSE button of the adjustment remote commander
each time to set the data.
5) Select page: 6, address: 01, set data: A7, and press the PAUSE button.
6) Select page: 6, address: 01, set data: A5, and press the PAUSE button.
(The auto white balance adjustment is performed and the
adjustment data is stored in page: F, address: 54 and 55.)
7) Select page: 6, address: 02, and check that the data is "01".
8) Select page: 6, address: 01, set data: 3F, and press the PAUSE button.
9) Select page: 0, address: 03, and set data: 04.
10) Select page: 1, and check that the display data (Note2) satisfies
the R ratio specified value.
11) Select page: 0, address: 03, and set data: 05.
12) Select page: 1, and check that the display data (Note2) satisfies
the B ratio specified value.
13) Select page: E, address: 88 to 8B, and input the data noted
down at step 3).
Note: After setting each data, be sure to press the PAUSE button of
the adjustment remote commander.
Processing after Completing Adjustments
1) Select page: 0, address: 01, and set data: 00.
2) Select page: 0, address: 03, and set data: 00.
3) Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
5-28
Clear chart
(Color reproduction adjustment frame)
Filter C14 for color temperature
correction
Display data of page 1 (Note2)
Adjustment remote commander
F
54, 55
720H model
R ratio: 2BC0 to 2C40
B ratio: 5F40 to 5FC0
960H model
R ratio: 2C40 to 2CC0
B ratio: 5D40 to 5DC0
Display data
88 89 8A
2C 00 5F
2C 80 5D
8B
80
80