Table of Contents
Advertisement
2-3. F PANEL ASSEMBLY, CABINET (R) ASSEMBLY
2 Remove
the claw
!º Cushion (N)
1 Two screws (M2 × 4),
lock ace, p2
3 Cabinet (S) shoe
9 Panel (N) (front)
assembly
Note: the TR models do not have
the harness (DP-74 (2.5 INCH LCD MODEL)
or DP-75 (3.0/3.5 INCH LCD MODEL))
shown by Note.
2-4. MA-354, 355, 357 BOARD
[MA-354, 355, 357 BOARD CHECK SERVICE POSITION]
Adjustment remote
commander (RM-95)
LANC jack
FP-77 flexible board (22P)
MA-354, 355, 357 board
8 FP-77 flexible board (22P)
6 Screw (M2 × 4),
4 Screw
lock ace, p2
(M2 × 4),
lock ace, p2
!¢ Two screws (M2 × 4),
lock ace, p2
7 Remove the claws
Remove it while taking
care as the FP-77 flexible
cable is connected.
2 FP-76 flexible board (8P)
1 Two tapping screws (B2 × 5)
7 MA-354, 355, 357 board
3
- 2 1
V C
Control switch block
(MF-9500) (4P)
FP-76 flexible board (8P)
3
- 2 1
V C
Note
5 Screw
(M2 × 4),
lock ace, p2
3 Two tapping screws
(B2 × 5)
6 Tapping screw
(B2 × 5)
4 Control switch block
(MF-9500) (4P)
5 Two harnesses
(from microphone)
CPC-13 jig
(J-6082-443-A)
AC POWER
ADAPTOR
Note: the TR models do not have the harness
Note
2-4
!£ Screw (M2 × 4),
lock ace, p2
!™ Screw (M2 × 4),
lock ace, p2
!∞ Remove the
claws
!¡ Three screws (M2 × 4),
lock ace, p2
!§ Cabinet (R) assembly
CPC-13 jig
Insulater
side
DC IN
AC IN
(DP-74 (2.5 INCH LCD MODEL)
or DP-75 (3.0/3.5 INCH LCD MODEL))
shown by Note.
Cabinet (R) assembly
Hide quick links:
Advertisement
Table of Contents
