Sony DCR-TRV103 Service Manual page 138

Fig. 5-3-3. Shows the color bar signals recorded on the alignment
tape.
Note : Measure using the VIDEO terminal (Terminated at 75 Ω).
For NTSC model
White (75%)
0.714V
1V
0.286V
Horizontal sync signal
Color bar signal waveform
For PAL model
White (100%)
0.7V
1V
0.3V
Horizontal sync signal
Color bar signal waveform
3-1-6. Input/output Level and Impedance
Video input/output
Phono jack, 1Vp-p, 75Ω, unbalanced, sync negative
S video input/output
4-pin mini DIN
Luminance signal:
1Vp-p, 75Ω, unbalanced, sync negative
Chrominance signal:
0.286Vp-p, 75Ω, unbalanced (NTSC)
0.300Vp-p, 75Ω, unbalanced (PAL)
Audio input/output
Phono jack:
Input: -7.5dBs, input impedance more than 47kΩ
Output: -7.5dBs, (at load impedance 47kΩ), output impedance less than 2.2kΩ
White (100%)
Burst signal
Q
I
Burst signal
Fig. 5-3-3. Color Bar Signal of the Alignment Tape
(75%)
0.286V
0.3V
(100%)
5-49
Q I Black
White
(100%)
Color bar pattern
Color bar pattern