The Experimental Settings - Cisco TelePresence System Quick Set C20 Administrator's Manual

Cisco TelePresence System Quick Set C20 and Profiles using C20
Contents Introduction

The Experimental settings

The Experimental settings are beta preview features and can be used 'as is' . They are not fully
documented.
NOTE: The Experimental settings are likely to change without further notice.
Experimental Audio EcReferenceDelay
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <0..300>
Example: Experimental Audio EcReferenceDelay: 0
Experimental CapsetFilter
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <S: 0, 100>
Example: Experimental CapsetFilter: ""
Experimental CapsetReduction
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <Auto/Reduced>
Example: Experimental CapsetReduction: Auto
Experimental Conference [1..1] PacketLossResilience ForwardErrorCorrection
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Will enable ForwardErrorCorrection (RFC5109) mechanism as part of the PacketLossResilience
mechanism. Default value is On.
On: Forward error correction will be used as part of the PacketLossResilience mechanism.
Off: Forward error correction will NOT be used as part of the PacketLossResilience mechanism.
Requires user role: ADMIN
Value space: <On/Off>
Example: Experimental Conference 1 PacketLossResilience
ForwardErrorCorrection: On
D14637.08 Profile C20 and Quick Set C20 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
Web interface Advanced settings Advanced settings
Experimental Conference [1..1] PacketLossResilience RateAdaption
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Will use the a RateAdaption algorithm adapted to the PacketLossResilience mechanism. Default
value is On.
Requires user role: ADMIN
Value space: <On/Off>
Example: Experimental Conference 1 PacketLossResilience RateAdaption: On
Experimental Conference [1..1] Multistream Mode
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <Off/On>
Example: Experimental Conference 1 Multistream Mode: Off
Experimental Conference [1..1] Multistream InputCount
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change
Requires user role: ADMIN
Value space: <1..4>
Example: Experimental Conference 1 Multistream InputCount: 1
Experimental Conference [1..1] Multistream OutputCount
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change
Requires user role: ADMIN
Value space: <1..4>
Example: Experimental Conference 1 Multistream OutputCount: 1
Experimental Conference [1..1] Multistream Stream [1..4] Source
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <1/2>
Example: Experimental Conference 1 Multistream Stream 1 Source: 1
65
Password protection
On: RateAdaption will be used as part of the PacketLossResilience mechanism.
Off: RateAdaption will NOT be used as part of the PacketLossResilience mechanism.
Administrator guide
Appendices Contact us
www.cisco.com