Starting The Web Interface - Cisco TelePresence System Quick Set C20 Administrator's Manual

Cisco TelePresence System Quick Set C20 and Profiles using C20
Contents Introduction

Starting the web interface

The web interface provides full configuration access to your
video conference system.
You can connect from a computer and administer the system
remotely.
In the following you will find information how to use the web
interface for system configuration and maintenance.
D14637.08 Profile C20 and Quick Set C20 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
Web interface Advanced settings
1. Connect to the video system
Open a web browser and enter the
IP address of the video system in the
address bar.
To find the IP address (IPv4 or IPv6), tap
More > Settings > System Information
on a Touch controller; or navigate to
Home > Settings > System information
when using a remote control and the
on-screen menu.
10
Password protection Appendices
Enter the user name and password for
your video system and press
The system is delivered with a default
user named
(i.e. leave the
NOTE:
set a password for the
restrict access to system configuration,
Administrator guide
Contact us
2. Sign in
Sign In.
admin
with no password
Password field blank when
signing in for the first time).
We strongly recommend that you
admin user to
see the next page.
Sign out
Click on your user
name and select
Sign out from the
drop down menu.
www.cisco.com