Factory Reset - Cisco TelePresence System Quick Set C20 Administrator's Manual

Cisco TelePresence System Quick Set C20 and Profiles using C20
Contents Introduction

Factory reset

When performing a factory reset the call logs will be deleted
and all system parameters will be reset to default values. All
files that have been uploaded to the codec will be deleted.
Release keys and option keys will be preserved.
NOTE: It is not possible to undo a factory reset.
Read the provided information carefully before you perform a
factory reset. Then check the I want to reset...
press Perform a factory reset.
Wait while the system resets. The system will reboot
automatically when finished.
D14637.08 Profile C20 and Quick Set C20 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
Web interface
box, and finally
Maintenance
Software Upgrade
Certificate Management
Audit Certificate
User Administration
Restart
Factory Reset
Advanced settings Password protection
29
Administrator guide
Appendices Contact us
www.cisco.com