Panasonic KX-TEB308 Features Manual page 76

1.9 Automatic Route Selection (ARS) Features
Sequence of Transmitted Code (
The sequence of transmitted codes (C: Carrier Access Code; A: Authorisation Code; I: Itemised Billing
Code; H: Telephone Number) can be selected. When "C.I.A.H" is selected, the dialled numbers of
Itemised Billing Code (I) and Authorisation Code (A) are shown on the displays of PTs and SMDR (
1.20.1 Station Message Detail Recording (SMDR)).
[Programming Example: Authorisation & Itemised Billing Code Table]
Routing
Plan No.
1
2
1 Route 1-4 Authorisation Code [381-384]
*
2 Route 1-4 Itemised Billing [385-388]
*
In this example:
Dialled Number
9-893-425-9477
(Extn. 101)
9-593-425-9477
(Extn. 101)
76 Feature Guide
Modification
Leading
Removed
No.
No. of Digits
8 0
5 0
1
Pulse*
2
11223344-P* -0123456789-101-893-425-9477
Added No. Authorisation
Code
1
Pulse* ( Dial Mode [401])
P (Pause)* 2 (
Pulse
11223344-PPPP-012345-P-67890123456789-101-593-425-9477
Added No.
Authorisation and Itemised Billing Code Order [390])
Added No.
11223344
11223344PPPP
#012345
(PPPP: 6 s,
#: Pulse to
Tone Conversion
( 1.5.2.4 Dial
Type Selection))
Modified Number
Tone
Itemised Telephone
Billing Code No.
Pause Time [417])
Tone
Authorisation Itemised
Code Billing Code
Authorisation
Itemised Billing*
1
Code*
0123456789 Enable (on CO 1/2)
(on CO 1/2) (Itemised Billing Code:
Extn. 101)
67890123456 Enable (on CO 1)
789 (on CO 1) (Itemised Billing Code:
Extn. 101)
A call via provider
access is made using
Routing Plan 1 when the
Automatic Line Access
number is assigned to
"9".
The Authorisation code
and the Itemised Billing
code are transmitted in
tone mode.
The pause time is
automatically inserted
before entering the
Authorisation code.
A call via provider
access is made using
Routing Plan 2 when the
Automatic Line Access
number is assigned to
Telephone
"9".
No.
2
Description