Operating Modes; Program Mode - Elation ELED QA Strip User Instructions

ELED QA Strip
LED Display Backlight On/Off:
To set the LED display to turn off after 10 seconds, press the MODE
button until "Disperm BackLight" is displayed. Either "On" or "Off" will
be displayed. Press the UP or DOWN button so that "Off" is displayed,
the display will now turn off after 10secs. Press any button for at least
5secs. to turn the display on again. Be advised though that the display
will turn off automatically after 10 seconds of inactivity. To make the
backlight display stay on at all times, press the UP of DOWN button so
that "On" is displayed.

Operating Modes:

You can use the ELED QA Strip in four ways:
• Macro Mode - There are 68 color macros to choose from.
• Program Mode - There are 15 built in programs and sound active
mode to choose from.
• RGBA mode - Control the intensity of all four colors adjusting the
intensity to your desire.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller such as
as the Elation® Show Designer™.
Macro Mode:
1. Plug the fixture in and press the MODE button until "Color Macro" is
displayed.
2. There are 68 macros to choose from. Select your desired macro by
pressing the UP and DOWN buttons.
Fade Program:
This mode is used in conjunction with the RGBA
mode.
1. To run a fade program first create your desired color in RGBA mode.
After you have created your color press the MODE button until
"Program Fade Speed" is displayed.
2. Press the UP or DOWN buttons to make the adjustmetns. "Speed 0"
is the slowest speed, "Speed 15" the fastest speed.

Program Mode:

1. Plug the fixture in and press the MODE button until "Color Program"
is displayed.
2. There are 15 built-in programs to choose from or you can select
"sound active" to run the unit by sound. Select your desired program
by pressing the UP and DOWN buttons. You can set your program
Elation Professional - www.elationlighting.com - ELED QA Strip Instruction Manual Page 7
Operating Instructions ELED QA Strip
speed by following the next set of instructions. The direction of cer-
tain programs can also be changed under Directions Set.
Direction Set:
This feature is used in conjunction with 36 DMX
Channel mode, 54 DMX Channel mode and 72 DMX Channel mode. The
direction in which the pixels light up can be reversed so that the pixel line
up can start at either end of the bar. This feature is useful when the unit
is installed in a reversed orientation so the unit itself does not have to
be uninstalled and reversed. Example: When using 36 Channel mode,
Channel 1 LEDs 1 & 2 can start at either end of the bar depending
on the "Direction Set" set up.
1. To change the starting direction press the MODE button until
"Direction Set" is displayed.
2. Press the UP or DOWN buttons to select "Positive" in which the pix-
els light up from right to left, or "Negative" in which the pixels will
light up left to right.
Program Mode Speed Adjustment:
1. To adjust the speed of your program press the MODE button until
"Color Speed" is displayed.
2. Press the UP or DOWN buttons to make the adjustmetns. "Speed 1"
is the slowest speed, "Speed 16" the fastest speed.
RGBA Mode:
1. Plug the fixture in and press the MODE button until:
2. When "Single Color Red" is displayed you are in Red dimming mode.
Press the UP and DOWN buttons to adjust intensity.
3. When "Single Color Green" is displayed you are in Green dimming
mode. Press the UP and DOWN buttons to adjust intensity.
4. When "Single Color Blue" is displayed you are in Blue dimming
mode. Press the UP and DOWN buttons to adjust intensity.
5. When "Single Color Amber" is displayed you are in White dimming
mode. Press the UP and DOWN buttons to adjust intensity.
6. You can use the color macro chart on page 14 to create one of the 68
macros.
DMX Mode:
Operating through a DMX controller gives the user the freedom to create
their own programs tailored to their own individual needs. The ELED QA
Strip has 9 DMX modes: 1 Channel mode, 2 Channel mode, 4 Channel
mode, 5 Channel mode, 7 Channel mode, 8 Channel mode, 36 Channel
Elation Professional - www.elationlighting.com - ELED QA Strip Instruction Manual Page 8
Operating Instructions