Load Media; Set Printer Defaults - Epson Mobilink TM-P60 Installation Manual

2.4

Load Media

The following instructions explain how to install the roll paper in the
1. Open the roll paper cover by pressing the button beside it.
2. Remove the used roll paper core (if applicable) and insert the new roll. Paper feeds from the bottom out
between the tear bar and the cover.
3. Extend a short section of paper, close the cover and tear off the extra paper using the tear bar.
2.5

Set Printer Defaults

Follow these instructions to default the printer:
1. Open door
2. Hold down the
button
POWER
3. Press the button six times
FEED
4. Close door
5. Open door
6. Press one time
FEED
7. Close door
Mobilink TM-P60
2 Installation Manual
Figure 2-1. COM1 Port Example
button and press the
FEED
Mobilink TM-P60
NOTE:
Some important default settings to remember:
• Default IP: 192.168.192.168
• Default subnet mask: 255.255.255.0
• Default SSID: EpsonNetIBSS (case
sensitive)
• Default port: 9100
• Default channel: 11
.