Operations From The Remote Controller - JVC KS-PD100 Owner's Manual

Operations from the remote controller

• From the remote controller, playback mode selection is not available. Perform the operation on
the control panel to select a playback mode.
You can control the iPod using the remote controller supplied with your receiver.
Examples:
RM-RK50
How the buttons on the remote controller work as the
• The illustrations of RM-RK300 are used as examples.
During playback
MENU (Enters the "Music" menu)
38
(Play/Pause)
Basic operation
To select a track:
• Press ¢ (or 3) to go to the next tracks.
• Press 4 (or 2) to go to the beginning of the
current track and the previous tracks.
To fast-forward or reverse a track:
• Press and hold ¢ (or 3) to fast-forward.
• Press and hold 4 (or 2) to reverse.
To pause or resume playback: Press ∞.
Each time you press the button, the playback
pauses and resumes alternately.
Functions the same as
the iPod operation
Click Wheel
the previous items)
RM-RK300
iPod's controls
When selecting a track from the "Music" menu
MENU (Moves back to the previous layer)
(Selects
Select (Confirms the selection)
Selecting a track from the "Music" menu
1 Press 5 to enter the "Music" menu.
• Now the buttons on remote controller work
as the menu selecting buttons.*
2 Press ¢/4 (or 3/2) to select an item,
then press ∞ to confirm the selection.
When the selected item has a next layer, you
will enter the layer. Repeat the procedure until
the desired track is confirmed.
• You can skip 10 items at a time by pressing
and holding ¢/4 (or 3/2).
• To move back to the previous layer, press 5.
* The menu selecting mode will be canceled;
– If no operations are done for about 5 seconds.
– When you confirm the selection of a track.
12
RM-RK230
Click Wheel (Selects
the next items)