JVC KS-PD100 Owner's Manual page 23

Operations from the control panel—For Type C
How the buttons on the control panel work as the
• : functions when you press and hold the button.
During playback
(Enters the Top Menu)
2 2
37 37
(Play/Stop)
Basic operation
To select a track:
• Press ¢ to go to the next tracks.
• Press 4 to go to the beginning of the current
track and the previous tracks.
To fast-forward or reverse a track:
• Press and hold ¢ to fast-forward.
• Press and hold 4 to reverse.
To stop or start playback: Press ∞.
Each time you press the button, the playback
stops and resumes alternately.
Selecting a track from the Top Menu
1 Press 5 to enter the Top Menu.*
2 Press ¢ or 4 to select an item, then press
∞ to confirm the selection.
When the selected item has a next layer, you
will enter the layer. Repeat the procedure until
the desired track is confirmed.
• You can also skip 10 items at a time by
pressing and holding ¢ or 4.
• To move back to the previous layer, press 5.
3 3
5 5
Skips previous 10 items
1
D. player's controls
When selecting a track from the Top Menu
(Moves back to the previous layer)
(Selects the previous
items)
Selecting playback modes*
• Refer to the operation of playback modes
section of the instructions supplied with the
receiver.
3
Repeat play* : Select one of the followings:
• Track: Functions the same as "Repeat Mode
One" of the D. player.
• Disc: Functions the same as "Repeat Mode
All" of the D. player.
To cancel, select Off.
Random play* 3
"Random Play."
To cancel, select Off.
1
* The menu selecting mode will be canceled;
– If no operations are done for about 5 seconds.
– When you confirm the selection of a track.
* 2 For the receivers which show "CD-CH (CD-Changer)"
when the D. player is selected as the source, you can
use only one of the playback modes at the same time.
* 3 While any playback mode is selected, the
corresponding indicator lights up on the display of
the receiver.
8
∞ ∞
(Selects the next
items)
Skips next 10 items
(Confirms the selection)
ENTER ENTER
2
: Select All or MAG to activate