Step 2 Pc Network Setup; Setting The Ip Address Of The Pc; For Windows - JVC DM-NC40 Instructions Manual

Step 2 PC Network Setup

2-1 Setting the IP Address of the PC (For Windows XP)
When connection and installation are completed, the IP address of the PC controlling the unit
is set.
For Windows XP, perform the setting using the steps shown below.
page 22)
1.
Click
•
Right click "My Network" and select
2.
Select the network of the PC that will be used for Web browser operations
•
Right click and select
3.
Select "Internet Protocol (TCP/IP)" and click
20
.
.
Confirm that the checkbox is selected.
Memo
If "Client for Microsoft Network" and "Internet
Protocol(TCP/IP)" are not displayed, perform "Install
(N)...".
1 Select "Internet Protocol (TCP/IP)".
2 Click

(For Windows 2000,

.
see