Launching The Browser - JVC DM-NC40 Instructions Manual

Step 3 Launching the Web Browser

3-3 Launching the Browser

When the IP address of DM-NC40 is specified in the Web browser and login as an administrator
is performed, the initial setup (STATUS) screen is displayed.
1.
Launch the Web browser
2.
Enter the user name and password (Login as an administrator)
To login by different access level, close previous browser and reconnect or open new browser and
connect.
3.
Network Codec screen (STATUS) is displayed
26
1 Enter the IP address of the unit.
(Factory setting, 10.0.0.1, is
available when there is no
DHCP server.)
2 Click "Go".
Memo
Direct specification of the IP ad-
dress may not be possible when
a proxy server is used for
Internet access. In this case, dis-
able the proxy setting.
1 Enter user name of administrator. Factory setting
is "admin".
2 Enter password of administrator. Factory setting
is "dm-nc40".
3 Click
.
Click "Detailed Setup" to
display submenus.
(Continued)